Big thanks to Mike90 for giving me this hint. Hope this information will be useful to someone, as it was for me.
On flash(base) version of Jigidi you cannot copy text that appears after you solve puzzle.
And sometimes GA creators are leaving not only short xxxxx GA links (with O and 0 hard to differ), but also LONG sgtools links.
If you are using HTML5 version of Jigidi, you can just copy text from that box.

To use HTML5 Jigidi version, you just have to add "&g=5" without quotation marks after jigidi link.

P.S. HTML5 puzzle environment is still experimental so use it with caution.
Little test puzzle

8 years ago*

Comment has been collapsed.

&g=5

Right now it works this way, but previously it was a bit different... don't take it as the absolute truth, it might change in the future.
If Flash Player fails to load (or is disabled), after a few seconds a prompt will appear, suggesting the HTML5 version.

8 years ago
Permalink

Comment has been collapsed.

i tryed HTML5 version once - message didnt showed up :(

8 years ago
Permalink

Comment has been collapsed.

Sometimes completion messages don't show up, no matter what version you're using (it's happened to me a few times).
In that case, you would notice on the main puzzle page that your progress is stuck at 99% (or something like that).
The only solution is to restart the puzzle.

8 years ago*
Permalink

Comment has been collapsed.

im glad it was 20-30 pieces puzzle )

8 years ago
Permalink

Comment has been collapsed.

I'm still mad because it was a 300+ pieces puzzle... I finished it again, though.

8 years ago
Permalink

Comment has been collapsed.

or to look for a single piece that's ever so slightly out of whack. happened to me a few times

8 years ago
Permalink

Comment has been collapsed.

for me whenever it's happened in the flash version it's still shown as completed on the pause menu and allowed me to bring up the completion dialogue manually, whereas with the html version I had to restart the puzzle completely. rarely happens in flash version anyway but happened to me twice in html so I stuck with flash
didn't realise you could copy/paste the message from the html version though, or I might have been more forgiving of it

8 years ago
Permalink

Comment has been collapsed.

Thanks, didn't know this before

8 years ago
Permalink

Comment has been collapsed.

Cute pic.

8 years ago
Permalink

Comment has been collapsed.

very helpful information!

8 years ago
Permalink

Comment has been collapsed.

i copied it

8 years ago
Permalink

Comment has been collapsed.

View attached image.
8 years ago
Permalink

Comment has been collapsed.

Copy & paste doesn't seem to work very well in Chrome.
Have to resort to "Inspect element" and copying the text from the HTML source instead.

8 years ago
Permalink

Comment has been collapsed.

It works for me. Click at the beginning (or the end) of what you want to copy, then hold down shift and click at the other end of it.

8 years ago
Permalink

Comment has been collapsed.

Or just double tap at the beginning of the text, it will highlight all line

8 years ago
Permalink

Comment has been collapsed.

Using Chrome and couldnt copy it either. Double tap would only highligt one word (which should be sufficient in case of a giveaway link, of course)

8 years ago
Permalink

Comment has been collapsed.

0:00:24 Thanks for the test! Try to copy this text! Close
It's ok!

8 years ago
Permalink

Comment has been collapsed.

Worked!

Edit: random test?

8 years ago*
Permalink

Comment has been collapsed.

Worked with your link in firefox on Windows!

8 years ago
Permalink

Comment has been collapsed.

Thanks for the test! Try to copy this text! :-p

8 years ago
Permalink

Comment has been collapsed.

Sign in through Steam to add a comment.