i see some people talk about magic ns device but i don't know if work for your purpose
Comment has been collapsed.
I have one of these that does the job quite nicely https://www.mayflash.com/Products/NINTENDOWiiU/MAGIC-NS.html
It's great because it also lets me connect my Wii U pro controller to the switch, and my switch pro controllers to my PC
There's also the 8bit do which I had that did the same thing : https://www.8bitdo.com/usb-adapter-ps1-classic/
(gave that one away to a friend to use their wii u controller on their switch)
Comment has been collapsed.
Oh ok then you might want to look for WiinUSoft. I haven't had to use it since I got the adapters that do it automatically, but that was a software driver that could work with bluetooth to connect a Wii U pro controller, and if I recall the "pro" version also let you connect switch controllers. It worked for me about a year ago, but I can't seem to find the tutorial I used to set it up back then.
Comment has been collapsed.
I have one of these. You can connect it directly as a pro controller on your bluetooth adapter without changing anything. You just need to hold the home button until the controller light blinks fast. Then it will be discoverable on PC. Connect it to your pc via bluetooth then activate the nintendo pro controller support in steam. That's it.
Comment has been collapsed.
I've tried with Home + A and Home + Y, both ways it's detected by the bluetooth adapter as "Pro Controller", apparently it establishes connection, but in that moment the lights on the controller go off and it's not really connected. I'll try with a long home pressing.
Comment has been collapsed.
Thanks, I just tried it, but with no luck. I activated the Switch Pro Controller Support in steam, then went to bluetooth devices, pressed the home button on the controller and paired with the Pro Controller. The moment that it pairs, the controller goes off :(
Comment has been collapsed.
235 Comments - Last post 23 minutes ago by PsyKo
23 Comments - Last post 27 minutes ago by pb1
8 Comments - Last post 1 hour ago by perfvillain
1,435 Comments - Last post 3 hours ago by CommissarCiaphasCain
49 Comments - Last post 3 hours ago by VincenzoM96
4 Comments - Last post 4 hours ago by ZoOmEr4402
34 Comments - Last post 4 hours ago by radagast82
83 Comments - Last post 23 seconds ago by Navaro
728 Comments - Last post 16 minutes ago by ThePositronicMan
1 Comments - Last post 18 minutes ago by Tucs
26,575 Comments - Last post 19 minutes ago by marilynhanson
78 Comments - Last post 32 minutes ago by GreyBound
478 Comments - Last post 49 minutes ago by Fitz10024
74 Comments - Last post 58 minutes ago by RePlayBe
Hi, I bought one of these cheap clones of the Switch Pro controller (for about 10€) and I must say it's not bad at all. I can use it on PC using the cable and it's detected automatically as a Xbox 360 controller. But I have found nothing on how to connect it via bluetooh.
Is there something that can be used for that pourpose? Something similar to Nefarius' ViGEm/DsHidMini that allows you to use the PS3 controllers on PC, both wired and wireless (this time without kidnapping the bluetooth adapter, like it happened with SCPToolkit)
Comment has been collapsed.